Anycubic Photon Mono M7 Pro resin 3D printer, 14K, grey
In your cart: 0
Delivery options to:
LatviaThe Anycubic Photon Mono M7 Pro is a resin 3D printer for model making, prototyping and creative projects. Its 223 × 126 × 230 mm build area accommodates larger models or multiple parts in one print job. Printing speeds reach up to 170 mm/h when using high-speed resin.
Fine detail and even exposure
The 10.1-inch 14K display has a resolution of 13 320 × 5 120 pixels. LightTurbo 3.0 combines a COB light source with Fresnel lenses and reflectors to deliver at least 90% light uniformity. Stated dimensional tolerances are ±0.01 to 0.05 mm.
Resin handling and print monitoring
- Temperature control: dynamic resin vat temperature regulation helps maintain consistent printing conditions.
- Automatic refill: the resin refill system reduces interruptions during longer print jobs.
- Monitoring: sensors track resin level, remaining resin quantity and release film service life. The print job can be paused in certain error situations.
Project preparation and management
The printer works with the Anycubic app, Photon Workshop and the Makeronline community for print preparation, job management and project sharing. USB and Wi-Fi connectivity are available.
| USB | Yes |
|---|---|
| Build volume | 6462.54 cm³ |
| Layer resolution | 0.01–0.15 mm |
| Print technology | Resin 3D printing |
| Build area dimensions | 22.3 × 12.6 × 23 cm |
| Colour | Grey |
| Depth | 31.5 cm |
| Height | 52 cm |
| Weight | 12.8 kg |
| Width | 31.2 cm |
| Maximum power consumption | 240 W |
| Printable materials | Anycubic resins |
| Wi-Fi | Yes |
| Printing speed | Up to 170 mm/h with high-speed resin |
| Display diagonal | 10.1 inches |
| Display resolution | 14K, 13 320 × 5 120 pixels |
| Lighting system | LightTurbo 3.0 with a COB light source, Fresnel lenses and reflectors |
| Light uniformity | At least 90% |
| Dimensional tolerances | ±0.01 to 0.05 mm |
| Resin refill | Automatic |
| Resin vat temperature control | Dynamic |
| Print monitoring | Print failure detection, resin level and remaining quantity monitoring, release film service life monitoring |
| Software compatibility | Anycubic app, Photon Workshop and Makeronline |
| EAN | 6974662350503 |
|---|
Can it reach 170 mm/h with any resin?
The speed of up to 170 mm/h is specified for use with high-speed resin. Anycubic resins are listed as printable materials; this speed is not confirmed for every resin.
Can printing be paused if an error is detected?
Sensors monitor the printing process, and the print job can be paused in certain error situations. This does not mean that every possible print failure is detected.












Gudri pirkumi vienuviet