Anycubic multicolour 3D printer Kobra 3 V2 Combo, 255 × 255 × 260 mm build volume
In your cart: 0
Delivery options to:
LatviaThe Anycubic Kobra 3 V2 Combo is a 3D printer for making models in four colours. The included ACE Pro module feeds filament for multicolour printing and actively dries it at temperatures up to 55 °C.
Build volume and print setup
The build volume is 255 × 255 × 260 mm, and LeviQ 3.0 automatically levels the print bed. The default print speed is 300 mm/s, with a maximum of 600 mm/s and acceleration up to 20 000 mm/s². Assembly and initial startup take less than 15 minutes. A metal quick-release coupling makes it easier to change the nozzle.
Print control and monitoring
- Control. Use the 4.3-inch touchscreen, the Anycubic app or Anycubic Slicer Next over the local network. The USB connection is for printing only.
- Camera. Monitor prints or record time-lapse videos with the 720p camera. The printer detects print failures that produce tangled strands of filament.
- Print recovery. The filament sensor alerts you when you need to replenish material. You can resume printing after topping up the filament. Printing resumes automatically when power is restored.
The printer itself supports TPU. Both the printer and the ACE Pro module support PLA, PETG and ABS.
| Manufacturer | Anycubic |
|---|---|
| Model | K3VC-IP-O |
| Weight | Kobra 3 V2: 9.37 kg, ACE Pro: 4.6 kg |
| Supported materials | Kobra 3 V2: PLA, TPU, PETG and ABS only. ACE Pro: PLA, PETG, ABS, ASA, PET, PA, PC, PP and HIPS only. |
| Dimensions | Kobra 3 V2: 452.9 × 504.7 × 483 mm, ACE Pro: 365.94 × 282.84 × 234.5 mm |
| Power supply rating | 400 W |
| Multicolour printing | 4 colours |
| Maximum nozzle temperature | 300 °C |
| Build volume | 255 × 255 × 260 mm |
| Maximum bed temperature | 110 °C |
| Maximum print speed | 600 mm/s |
| Touchscreen | 4.3-inch capacitive touchscreen |
| Active drying | Up to 55 °C |
| Automatic levelling | LeviQ 3.0, no Z-axis offset, optimised design |
| Nozzle diameter | Standard: 0.4 mm. Options: 0.25, 0.6 and 0.8 mm. |
| Filament detection and print resumption | Supported |
| Print resumption after power loss | Supported |
| Video monitoring | Supplied HD camera with 720p support |
| Time-lapse recording | Supported |
| AI print error detection | Detects print failures that produce tangled strands of filament (spaghetti) |
| Object skipping and area levelling | Supported |
| Local network mode | Supported |
| Control and printing methods | Printer panel, Anycubic Slicer Next, Anycubic app, USB (printing only) |
| Default print speed | 300 mm/s |
| Maximum acceleration | 20 000 mm/s² |
| Y-axis and X-axis bearings | 60 mm Y-axis, SG15 bearings on the X-axis |
| Nozzle change | Metal quick-release coupling |
| Remote access | Real-time print progress monitoring in the Anycubic app |
| EAN | 6974662352088 |
|---|
Can the ACE Pro module feed TPU filament?
No. The Kobra 3 V2 printer supports TPU. The ACE Pro module supports PLA, PETG, ABS, ASA, PET, PA, PC, PP and HIPS.
What comes with the Kobra 3 V2 Combo?
The kit includes the printer, ACE Pro, print head, touchscreen, spool holder, cable holder, cleaning wiper, 2 M2×14 screws, 4 M3×6 screws, 2 M4×16 screws, M3×10 and M3×8 screws, 2 power cables, 4 cable organisers, signal cable, USB drive, filament tube, spanner set, hex socket screws (4.0, 3.0, 2.5, 2.0 and 1.5), filament sample, nozzle cleaner, grease, camera and user manual.












Gudri pirkumi vienuviet