eSUN PLA-Silk Rainbow filament 1.75 mm, 1 kg, universe
In your cart: 0
Delivery options to:
LatviaeSUN PLA-Silk Rainbow is a 1.75 mm filament for FDM 3D printers. This universe variant produces multicoloured prints with a smooth surface and a silky metallic sheen, with 1 kg net filament weight.
Decorative finish and colour transitions
The colour changes gradually approximately every 15–20 m of filament, allowing multicoloured printing without manual filament changes. It suits figurines, sculptures, decorations, toys, accessories, enclosures and cosplay props. The material uses high-purity raw materials without waste or recycled material.
Feed behaviour and print settings
- Filament feed: a diameter tolerance of ±0.03 mm and careful winding help maintain even feeding and reduce tangling.
- Model formation: shrinkage of 0.3–0.5% reduces the likelihood of warping and cracking. Good interlayer adhesion, minimal stringing and easy support removal help with printing and finishing.
- Settings: use a nozzle temperature of 210–230 °C, bed temperature of 45–60 °C and print speed of 40–300 mm/s. Recommended fan speed is 100%.
Printer and spool compatibility
The filament is compatible with most FDM printers, including models from Bambu Lab, Creality, Anycubic, Elegoo and Raise3D. It comes on a non-detachable spool. Before using an automatic filament feeding system, check that the spool dimensions fit the device.
| Manufacturer | eSUN |
|---|---|
| Type | PLA-Silk Rainbow |
| Material | PLA |
| Colour | universe |
| Finish | Silky, metallic sheen |
| Filament diameter | 1.75 mm |
| Diameter tolerance | ±0.03 mm |
| Net filament weight | 1 kg |
| Colour change | Approximately every 15–20 m |
| Material shrinkage | 0.3–0.5% |
| Density | 1.21 g/cm³ |
| Melt flow index (MFI) | 4.5 g/10 min (190 °C / 2.16 kg) |
| Heat distortion temperature (HDT) | 56 °C (0.45 MPa) |
| Flexural strength (XY) | 75.3 MPa |
| Flexural modulus (XY) | 2 023 MPa |
| Nozzle temperature | 210–230 °C |
| Bed temperature | 45–60 °C |
| Print speed | 40–300 mm/s |
| Recommended fan speed | 100% |
| Printing technology | FDM |
| Spool construction | Non-detachable |
| EAN | 6922572207127 |
|---|
Can I use it with an automatic filament feeding system?
Check that the spool dimensions are compatible with your feeding system before use. The filament is supplied on a non-detachable spool.
Do multicoloured prints require manual filament changes?
No. The colour changes gradually approximately every 15–20 m of filament, allowing multicoloured models to be printed from a single spool.












Gudri pirkumi vienuviet