eSUN PLA-Silk Rainbow filament 1.75 mm, 1 kg, Scorching Sun
In your cart: 0
Delivery options to:
LatviaeSUN PLA-Silk Rainbow is a PLA filament for FDM 3D printers. The Scorching Sun variant produces multicoloured models with a smooth surface and a silky, metallic sheen, without manually changing filament for each colour transition.
Gradual colour changes
Colours change approximately every 15–20 m of filament, creating multicoloured effects from a single spool. The material suits figurines, sculptures, decorations, accessories, enclosures and cosplay props. It is made from high-purity raw materials without waste or recycled materials.
Feed and printing settings
- Consistent feed: a 1.75 mm diameter with ±0.03 mm tolerance and careful winding help reduce nozzle clogging and tangling.
- Model formation: 0.3–0.5% shrinkage reduces the likelihood of warping and cracking. Good interlayer adhesion, minimal stringing and easy support removal assist printing and finishing.
- Settings: recommended nozzle temperature is 210–230 °C, bed temperature 45–60 °C, print speed 40–300 mm/s and fan speed 100%.
Spool and compatibility
The filament is compatible with most FDM printers, including models from Bambu Lab, Creality, Anycubic, Elegoo and Raise3D. Net filament weight is 1 kg. It comes on a non-detachable spool; check spool dimensions for compatibility before using it in an automatic filament feeding system.
| Manufacturer | eSUN |
|---|---|
| Model | PLA-SKRB175O-SS1P1 |
| Type | PLA-Silk Rainbow |
| Material | PLA |
| Colour | scorching sun |
| Finish | Silky, metallic sheen |
| Filament diameter | 1.75 mm |
| Diameter tolerance | ±0.03 mm |
| Net filament weight | 1 kg |
| Colour change | Approximately every 15–20 m |
| Material shrinkage | 0.3–0.5% |
| Density | 1.21 g/cm³ |
| Melt flow index (MFI) | 4.5 g/10 min (190 °C / 2.16 kg) |
| Heat deflection temperature (HDT) | 56 °C (0.45 MPa) |
| Flexural strength (XY) | 75.3 MPa |
| Flexural modulus (XY) | 2 023 MPa |
| Nozzle temperature | 210–230 °C |
| Bed temperature | 45–60 °C |
| Print speed | 40–300 mm/s |
| Recommended fan speed | 100% |
| Printing technology | FDM |
| Spool construction | Non-detachable |
| EAN | 6922572205604 |
|---|
Can this spool be used in an automatic filament feeding system?
Check that the spool dimensions are compatible with your feeding system before use. The filament is supplied on a non-detachable spool.
Do I need to change filament to get colour transitions?
No. Colours change gradually approximately every 15–20 m of filament, allowing multicoloured effects from one spool.












Gudri pirkumi vienuviet