eSUN PLA-Silk Rainbow filament 1.75 mm, 1 kg, forest
In your cart: 0
Delivery options to:
LatviaeSUN PLA-Silk Rainbow forest is a PLA filament for FDM 3D printing in forest green shades with a silky metallic sheen. It suits figurines, sculptures, decorations, accessories, enclosures and cosplay props.
Colour transitions from one spool
The colour changes gradually approximately every 15–20 m, producing multicoloured models without manually changing filament. The material creates a smooth surface.
Printing properties and settings
- Feeding: a diameter tolerance of ±0.03 mm supports even feeding, while careful winding reduces the risk of tangling.
- Model formation: shrinkage of 0.3–0.5% reduces the likelihood of warping and cracking. The material offers good interlayer adhesion, minimal stringing and easy support removal.
- Settings: nozzle 210–230 °C, bed 45–60 °C and print speed 40–300 mm/s; recommended fan speed is 100%.
Printer and spool compatibility
Compatible with most FDM printers, including models from Bambu Lab, Creality, Anycubic, Elegoo and Raise3D. The filament comes on a non-detachable spool. Check that the spool dimensions fit your device before using it in an automatic filament feeding system.
| Manufacturer | eSUN |
|---|---|
| Model | PLA-SKRB175O-F1P1 |
| Type | PLA-Silk Rainbow |
| Material | PLA |
| Colour | forest |
| Finish | Silky, metallic sheen |
| Filament diameter | 1.75 mm |
| Diameter tolerance | ±0.03 mm |
| Net filament weight | 1 kg |
| Colour change | Approximately every 15–20 m |
| Material shrinkage | 0.3–0.5% |
| Density | 1.21 g/cm³ |
| Melt flow index (MFI) | 4.5 g/10 min (190 °C / 2.16 kg) |
| Heat deflection temperature (HDT) | 56 °C (0.45 MPa) |
| Flexural strength (XY) | 75.3 MPa |
| Flexural modulus (XY) | 2023 MPa |
| Nozzle temperature | 210–230 °C |
| Bed temperature | 45–60 °C |
| Print speed | 40–300 mm/s |
| Recommended fan speed | 100% |
| Printing technology | FDM |
| Spool construction | Non-detachable |
| Raw materials | High-purity raw materials without waste or recycled materials |
| EAN | 6922572207110 |
|---|
Can I use it in an automatic filament feeding system?
The filament comes on a non-detachable spool. Check that its dimensions are compatible with your automatic feeding system before use.
Do I need to change filament manually for multicoloured prints?
No. The filament changes colour gradually approximately every 15–20 m, allowing colour transitions from a single spool.












Gudri pirkumi vienuviet