eSUN PLA-Silk Rainbow filament 1.75 mm, 1 kg, coral
In your cart: 0
Delivery options to:
LatviaeSUN PLA-Silk Rainbow is a coral filament for FDM 3D printers, producing multicoloured prints with a smooth surface and a silky metallic sheen. It suits figurines, sculptures, decorations, toys, accessories, enclosures and cosplay props.
Gradual colour transitions
The colour changes approximately every 15–20 m of filament, creating multicoloured effects from one spool without manual filament changes. The material uses high-purity raw materials without waste or recycled materials.
Printing properties and settings
- Feeding: a diameter tolerance of ±0.03 mm and careful winding support even feeding and reduce the risk of tangling.
- Model formation: low shrinkage of 0.3–0.5% reduces the likelihood of warping and cracking, while good interlayer adhesion supports model integrity.
- Finishing: minimal stringing and easy support removal simplify post-processing.
Recommended settings are a nozzle temperature of 210–230 °C, bed temperature of 45–60 °C, print speed of 40–300 mm/s and fan setting of 100%.
Feeding system compatibility
The filament is compatible with most FDM printers, including models from Bambu Lab, Creality, Anycubic, Elegoo and Raise3D. The spool is non-detachable; check its dimensions for compatibility before using it in an automatic filament feeding system.
| Manufacturer | eSUN |
|---|---|
| Type | PLA-Silk Rainbow |
| Material | PLA |
| Colour | Coral |
| Finish | Silky, metallic sheen |
| Filament diameter | 1.75 mm |
| Diameter tolerance | ±0.03 mm |
| Net filament weight | 1 kg |
| Colour change | Approximately every 15–20 m |
| Material shrinkage | 0.3–0.5% |
| Density | 1.21 g/cm³ |
| Melt flow index (MFI) | 4.5 g/10 min (190 °C / 2.16 kg) |
| Heat distortion temperature (HDT) | 56 °C (0.45 MPa) |
| Flexural strength (XY) | 75.3 MPa |
| Flexural modulus (XY) | 2 023 MPa |
| Nozzle temperature | 210–230 °C |
| Bed temperature | 45–60 °C |
| Print speed | 40–300 mm/s |
| Recommended fan speed | 100% |
| Printing technology | FDM |
| Spool construction | Non-detachable |
| EAN | 6922572207134 |
|---|
Do I need to change filament manually for multicoloured prints?
No. The colour changes gradually approximately every 15–20 m of filament, creating a multicoloured effect from one spool.
Can the spool be used in an automatic filament feeding system?
Check the spool dimensions for compatibility with your feeding system before use. The spool is non-detachable.












Gudri pirkumi vienuviet