eSUN PLA-Silk Magic 3D printing filament 1.75 mm, 1 kg, black and gold
In your cart: 0
Delivery options to:
LatviaeSUN PLA-Silk Magic is a PLA-based 3D printing filament combining black and gold with a silky sheen. Its dual-colour cross-section changes the printed model’s appearance with the viewing angle, highlighting shapes and contours.
Decorative printing
This material suits figurines, decorative elements and projects where surface appearance matters. Its smooth, glossy finish makes layer lines less noticeable. With a heat deflection temperature of 54.7 °C, it is best suited to prints that will not be exposed to high temperatures.
Printing requirements
The spool contains 1 kg of 1.75 mm filament. A heated build plate is required. Recommended settings are a nozzle temperature of 190–230 °C, a build plate temperature of 45–60 °C, a print speed below 200 mm/s and 100% fan cooling. Reducing the print speed for the model’s outer walls is recommended for a more pronounced surface gloss.
| Manufacturer | eSUN |
|---|---|
| Filament type | PLA-Silk Magic |
| Colour | Black and gold |
| Filament diameter | 1.75 mm |
| Filament weight | 1 kg |
| Nozzle temperature | 190–230 °C |
| Build plate temperature | 45–60 °C |
| Heated build plate | Required |
| Recommended print speed | Below 200 mm/s |
| Fan cooling | 100% |
| Heat deflection temperature (HDT) | 54.7 °C |
| Melt flow index (MFI) | 4.5 g/10 min (190 °C / 2.16 kg) |
| Tensile strength (Z) | 12.82 MPa |
| Elongation at break (Z) | 1.47% |
| Flexural strength (XY) | 64.2 MPa |
| Flexural modulus (XY) | 2486.54 MPa |
| IZOD impact strength (XY) | 2.87 kJ/m² |
| EAN | 6922572205253 |
|---|
Does this filament require a heated build plate?
Yes. A heated build plate is required, with a recommended temperature of 45–60 °C.
How can I achieve a more pronounced surface gloss?
Reducing the print speed for the model’s outer walls is recommended.












Gudri pirkumi vienuviet