eSUN PLA-Silk 3D printing filament PLA-SK175U1P1, 1.75 mm, 1 kg, blue
In your cart: 0
Delivery options to:
LatviaBlue eSUN PLA-Silk filament gives figurines, vases and ornaments a smooth, glossy finish without polishing. It is designed for FDM printers that use 1.75 mm filament.
Low shrinkage and good layer adhesion help prints retain their shape. Consistent diameter and even winding help prevent tangles, while smooth flow reduces the risk of nozzle clogging. Supports are easy to remove after printing.
Print settings and heat exposure
The recommended nozzle temperature is 190–230 °C, with a bed temperature of 45–60 °C, a print speed of 40–100 mm/s and fan cooling at 100%. With a heat deflection temperature of 50 °C, this PLA is best suited to models that will not be exposed to high temperatures.
| Manufacturer | eSUN |
|---|---|
| Model | PLA-SK175U1P1 |
| Filament type | PLA-Silk |
| Material | PLA |
| Colour | Blue |
| Finish | Glossy, silky |
| Filament diameter | 1.75 mm |
| Weight | 1 kg |
| Printing technology | FDM |
| Nozzle temperature | 190–230 °C |
| Heated bed temperature | 45–60 °C |
| Recommended print speed | 40–100 mm/s |
| Cooling | 100% |
| Density | 1.21 g/cm³ |
| Melt flow index (MFI) | 4.8 g/10 min (190 °C / 2.16 kg) |
| Tensile strength | 52 MPa |
| Elongation at break | 14.4% |
| Flexural strength | 65 MPa |
| Flexural modulus | 1447 MPa |
| Notched Izod impact strength | 5.86 kJ/m² |
| Heat deflection temperature | 50 °C |
| EAN | 6922572204195 |
|---|
Does the print need polishing to get the silky finish?
No. The filament produces a smooth, glossy surface as printed.












Gudri pirkumi vienuviet