eSUN PLA-Silk 3D printing filament PLA-SK175J1P1, 1.75 mm, 1 kg, gold
In your cart: 0
Delivery options to:
LatviaeSUN PLA-Silk is a gold filament for printing figurines, vases and ornaments. It gives prints a smooth, silky gloss without polishing.
Low shrinkage and good layer adhesion help prints retain their shape. The consistent diameter promotes smooth flow through the nozzle, and even winding reduces the risk of tangles. Supports are easy to remove after printing.
Recommended print settings
Use with FDM printers that take 1.75 mm filament. The recommended nozzle temperature is 190–230 °C, with a heated bed at 45–60 °C, a print speed of 40–100 mm/s and fan cooling at 100%. With a heat deflection temperature of 50 °C, this PLA is best suited to models that will not be exposed to high temperatures.
| Manufacturer | eSUN |
|---|---|
| Model | PLA-SK175J1P1 |
| Filament type | PLA-Silk |
| Material | PLA |
| Colour | Gold |
| Finish | Glossy, silky |
| Filament diameter | 1.75 mm |
| Weight | 1 kg |
| Printing technology | FDM |
| Nozzle temperature | 190–230 °C |
| Heated bed temperature | 45–60 °C |
| Recommended print speed | 40–100 mm/s |
| Cooling | 100% |
| Density | 1.21 g/cm³ |
| Melt flow index (MFI) | 4.8 g/10 min (190 °C / 2.16 kg) |
| Tensile strength | 52 MPa |
| Elongation at break | 14.4% |
| Flexural strength | 65 MPa |
| Flexural modulus | 1447 MPa |
| Notched Izod impact strength | 5.86 kJ/m² |
| Heat deflection temperature | 50 °C |
| EAN | 6922572204263 |
|---|
Do I need to polish the print to get a silky sheen?
No. The filament produces a smooth, glossy finish as printed.












Gudri pirkumi vienuviet