eSUN PLA-Silk 3D printing filament, 1.75 mm, 1 kg, rose gold — PLA-SK175O-IO1P1
In your cart: 0
Delivery options to:
LatviaRose gold eSUN PLA-Silk gives figurines, vases and ornaments a smooth, glossy finish with a silky sheen. The effect needs no polishing and suits decorative prints with intricate shapes.
Low shrinkage, limited warping and good layer adhesion help prints retain their intended shape. The filament flows smoothly through the nozzle to reduce the risk of clogs, while even winding helps prevent tangles. Supports are easy to remove after printing.
Recommended print settings
Use with FDM printers that take 1.75 mm filament. The recommended nozzle temperature is 190–230 °C and the heated bed temperature is 45–60 °C. Print at 40–100 mm/s with the cooling fan set to 100%.
| Manufacturer | eSUN |
|---|---|
| Model | PLA-SK175O-IO1P1 |
| Filament type | PLA-Silk |
| Material | PLA |
| Colour | Rose gold |
| Finish | Glossy, silky |
| Filament diameter | 1.75 mm |
| Weight | 1 kg |
| Printing technology | FDM |
| Nozzle temperature | 190–230 °C |
| Heated bed temperature | 45–60 °C |
| Recommended print speed | 40–100 mm/s |
| Cooling | 100% |
| Density | 1.21 g/cm³ |
| Melt flow index (MFI) | 4.8 g/10 min (190 °C / 2.16 kg) |
| Tensile strength | 52 MPa |
| Elongation at break | 14.4% |
| Flexural strength | 65 MPa |
| Flexural modulus | 1447 MPa |
| Notched Izod impact strength | 5.86 kJ/m² |
| Heat deflection temperature | 50 °C |
| EAN | 6922572204294 |
|---|
Is this filament suitable for parts exposed to heat?
Its heat deflection temperature is 50 °C, so it is best suited to models that will not be exposed to high temperatures.












Gudri pirkumi vienuviet