Free delivery to Latvijas Pasts parcel lockers from 35 €
Free delivery to Latvijas Pasts parcel lockers from 35 €
0
eSun

eSUN PLA-Metal 3D printing filament, 1.75 mm, 1 kg, silver

23.10 € incl. VAT
In supplier warehouse · 38 pcs. Delivery Time: 4–10 business days

In your cart: 0

Delivery options to:

Latvia
Store pickup Estimated: 26.11.–04.12.
Free
Parcel locker delivery Estimated: 30.11.–08.12.
from 1.90 €
Courier delivery Estimated: 30.11.–08.12.
from 4.90 €

Silver eSUN PLA-Metal gives decorative pieces, figurines, props and historical models a metallic look without painting or polishing. This PLA filament contains no metal powder. It produces a slightly matte satin finish with a metallic sheen and a fine grain that makes layer lines less visible.

Printer fit and settings

The spool holds 1 kg of filament for FDM printers that take 1.75 mm filament, including suitably configured Creality, Prusa, Raise3D and Voron models.

  • Print settings: use a nozzle temperature of 190–230 °C, a bed temperature of 45–60 °C and a print speed of 40–100 mm/s.
  • Printing and finishing: consistent diameter and low shrinkage help reduce warping, cracking and stringing. Layers bond well, supports are easy to remove and even winding helps prevent tangles.
  • Packaging: the filament is vacuum-sealed with a desiccant to protect it from moisture until opened.

The heat deflection temperature is 53 °C. Do not use finished prints in hot locations, such as inside a car left in the sun.


ManufacturereSUN
ModelPLA-Metal
MaterialPLA with no added metal powder
ColourSilver
Filament diameter1.75 mm
Net filament weight1 kg
FinishSatin, slightly matte, with a metallic sheen
Printing technologyFDM
Nozzle temperature190–230 °C
Bed temperature45–60 °C
Recommended print speed40–100 mm/s
Recommended fan speed100%
Density1.225 g/cm³
Tensile strength63 MPa
Elongation at break11.6%
Flexural strength92 MPa
Flexural modulus3274 MPa
Izod impact strength5 kJ/m²
Heat deflection temperature (HDT)53 °C
PackagingVacuum-sealed with a desiccant
EAN6922572202788
Is the printer brand enough to determine compatibility?

No. Check that your specific FDM printer model and configuration support 1.75 mm filament.

Reviews

No reviews for this item yetOnly customers can leave a review, after buying the item.