eSUN PLA-Metal 3D printing filament, 1.75 mm, 1 kg, gold
In your cart: 0
Delivery options to:
LatviaeSUN PLA-Metal in gold gives decorations, figurines, props and historical models a metallic look without painting or polishing. It contains no metal powder and produces a slightly matt satin finish with a metallic sheen.
Surface finish and print setup
The subtly grainy texture makes layer lines less visible and suits details designed to look like aged metal. Low shrinkage helps reduce warping, cracking and stringing. Good layer adhesion strengthens prints, supports are easy to remove, and even winding reduces the risk of tangles.
- Printer fit: for FDM printers that support 1.75 mm filament.
- Recommended settings: 190–230 °C nozzle, 45–60 °C bed and 40–100 mm/s print speed.
- Heat limitation: the heat deflection temperature is 53 °C. Do not use finished prints where they will be exposed to high temperatures, such as inside a car left in the sun.
The spool holds 1 kg of filament and is vacuum-sealed with desiccant to protect the material from moisture until opened.
| Manufacturer | eSUN |
|---|---|
| Model | PLA-Metal |
| Material | PLA with no metal powder additive |
| Colour | Gold |
| Filament diameter | 1.75 mm |
| Net filament weight | 1 kg |
| Finish | Satin, slightly matt, with a metallic sheen |
| Printing technology | FDM |
| Nozzle temperature | 190–230 °C |
| Bed temperature | 45–60 °C |
| Recommended print speed | 40–100 mm/s |
| Recommended fan speed | 100% |
| Density | 1.225 g/cm³ |
| Tensile strength | 63 MPa |
| Elongation at break | 11.6% |
| Flexural strength | 92 MPa |
| Flexural modulus | 3 274 MPa |
| Izod impact strength | 5 kJ/m² |
| Heat deflection temperature (HDT) | 53 °C |
| EAN | 6922572202771 |
|---|
Will it work with a Creality or Prusa printer?
Yes, if the specific FDM printer is configured for 1.75 mm filament. The same applies to Raise3D and Voron models.












Gudri pirkumi vienuviet