Free delivery to Latvijas Pasts parcel lockers from 35 €
Free delivery to Latvijas Pasts parcel lockers from 35 €
0
eSun

eSUN PLA-Metal 3D printing filament, 1.75 mm, 1 kg, antique brass

23.10 € incl. VAT
In supplier warehouse · 59 pcs. Delivery Time: 4–10 business days

In your cart: 0

Delivery options to:

Latvia
Store pickup Estimated: 27.11.–07.12.
Free
Parcel locker delivery Estimated: 01.12.–09.12.
from 1.90 €
Courier delivery Estimated: 01.12.–09.12.
from 4.90 €

eSUN PLA-Metal is an antique brass PLA filament for printing decorations, figurines, props and historical models. Its slightly matte satin finish has a metallic sheen without painting or polishing. The fine texture makes layer lines less visible, and the filament contains no metal powder.

Print settings and compatibility

A consistent diameter and low shrinkage help reduce warping, cracking and stringing. Good layer adhesion improves model strength, while easy-to-remove supports simplify finishing more complex prints.

  • Printer fit: FDM printers that accept 1.75 mm filament, including suitably configured Creality, Prusa, Raise3D and Voron models.
  • Recommended settings: 190–230 °C at the nozzle, 45–60 °C at the bed and a print speed of 40–100 mm/s.
  • Spool and packaging: 1 kg of filament, evenly wound to reduce tangling and vacuum-sealed with a desiccant to protect it from moisture until opened.

The heat deflection temperature is 53 °C. Do not use finished prints where they may be exposed to high temperatures, such as inside a car left in the sun.


ManufacturereSUN
ModelPLA-Metal
MaterialPLA without added metal powder
ColourAntique brass
Filament diameter1.75 mm
Net filament weight1 kg
FinishSlightly matte satin with a metallic sheen
Printing technologyFDM
Nozzle temperature190–230 °C
Bed temperature45–60 °C
Recommended print speed40–100 mm/s
Recommended fan speed100%
Density1.225 g/cm³
Tensile strength63 MPa
Elongation at break11.6%
Flexural strength92 MPa
Flexural modulus3274 MPa
Izod impact strength5 kJ/m²
Heat deflection temperature (HDT)53 °C
EAN6922572202795
Does this filament contain brass particles?

No. Antique brass describes the colour and appearance. The filament is PLA without added metal powder.

Reviews

No reviews for this item yetOnly customers can leave a review, after buying the item.