eSUN PLA-Matte Rainbow 3D printing filament 1.75 mm, 1 kg, yellow-white
In your cart: 0
Delivery options to:
LatviaeSUN PLA-Matte Rainbow is a yellow-white 3D printing filament that produces colour variations from a single spool. Its smooth, matte finish reduces visible light reflections, making it suitable for decorations, display figurines, cosplay props and prototypes.
Printing settings
- Temperatures: 210–230 °C nozzle and 65 °C build plate.
- Equipment: a PEI build plate and 0.4 mm nozzle are recommended.
- Speed and cooling: below 300 mm/s with the fan at 100%.
- Preparation: drying at 60 °C for more than 8 hours is recommended before printing.
Surface quality and supports
The material allows easy removal of support structures. For improved surface quality, enable Z-seam and start point alignment, disable Z-axis lift during travel moves and optimise the print path. Reduce printing speed if needed.
Use limitations
Recommended primarily for indoor use, this filament is not resistant to UV radiation, acids or bases. Its heat deflection temperature is 50.2 °C at 0.45 MPa. Finished prints should not be exposed to high temperatures, such as in a hot car or strong sunlight. Use for mechanical parts requires appropriately selected requirements.
| Manufacturer | eSUN |
|---|---|
| Model | PLA-Matte Rainbow |
| Type | 3D printing filament |
| Material | PLA-Matte Rainbow |
| Colour | Yellow-white |
| Finish | Matte |
| Filament weight | 1 kg |
| Filament diameter | 1.75 mm |
| Density | 1.329 g/cm³ |
| Nozzle temperature | 210–230 °C |
| Build plate temperature | 65 °C |
| Recommended build plate material | PEI |
| Recommended nozzle diameter | 0.4 mm |
| Print speed | Less than 300 mm/s |
| Fan speed | 100% |
| Recommended drying | 60 °C for more than 8 hours |
| Heat deflection temperature | 50.2 °C (0.45 MPa) |
| Tensile strength (X–Y) | 39.81 MPa |
| Tensile strength (Z) | 16.23 MPa |
| Elongation at break (X–Y) | 5.75% |
| Elongation at break (Z) | 1.80% |
| Flexural strength (X–Y) | 65 MPa |
| Flexural strength (Z) | 26.6 MPa |
| UV resistance | No |
| Applications | Decorations, cosplay, prototyping, mechanical parts with appropriately selected requirements |
| Resistance to acids and bases | No |
| EAN | 6922572223400 |
|---|
Is this filament suitable for outdoor prints?
It is recommended primarily for indoor use because it is not UV-resistant. Finished prints should not be exposed to high temperatures, including in a hot car or strong sunlight.
Are multiple spools needed for the colour gradients?
No. The yellow-white colour transitions are produced using a single spool of PLA-Matte Rainbow.












Gudri pirkumi vienuviet