eSUN PLA-Matte Rainbow 3D printing filament 1.75 mm, 1 kg, yellow–pink–purple
In your cart: 0
Delivery options to:
LatviaeSUN PLA-Matte Rainbow is a 3D printing filament with yellow, pink and purple colour transitions. A single spool creates colour variations in models with a smooth matte surface and reduced visible reflections.
Finish and applications
Use it for decorations, ornamental figurines, cosplay props and prototypes. Support structures are easy to remove. Mechanical parts are also an option where their requirements match the material's properties.
Printing settings
- Temperature: nozzle 210–230 °C and build plate 65 °C; a PEI build surface and 0.4 mm nozzle are recommended.
- Speed and cooling: print below 300 mm/s with the fan set to 100%.
- Preparation: drying at 60 °C for more than 8 hours is recommended before printing.
For a better surface finish, enable Z-seam and start point alignment, disable Z-axis retraction during idle passes and optimise the print path. Reduce print speed if necessary.
Use limitations
This material is recommended primarily for indoor use because it is not resistant to UV radiation, acids or bases. Its heat deflection temperature is 50.2 °C at 0.45 MPa. Do not expose finished prints to high temperatures, such as inside a hot car or in strong sunlight.
| Manufacturer | eSUN |
|---|---|
| Model | PLA-Matte Rainbow |
| Type | 3D printing filament |
| Material | PLA-Matte Rainbow |
| Colour | Yellow–pink–purple |
| Finish | Matte |
| Filament weight | 1 kg |
| Filament diameter | 1.75 mm |
| Density | 1.329 g/cm³ |
| Nozzle temperature | 210–230 °C |
| Build plate temperature | 65 °C |
| Recommended build surface | PEI |
| Recommended nozzle diameter | 0.4 mm |
| Print speed | Less than 300 mm/s |
| Fan speed | 100% |
| Recommended drying | 60 °C for more than 8 hours |
| Heat deflection temperature | 50.2 °C (0.45 MPa) |
| Tensile strength (X-Y) | 39.81 MPa |
| Tensile strength (Z) | 16.23 MPa |
| Elongation at break (X-Y) | 5.75% |
| Elongation at break (Z) | 1.80% |
| Flexural strength (X-Y) | 65 MPa |
| Flexural strength (Z) | 26.6 MPa |
| UV resistance | No |
| Applications | Decorations, cosplay, prototyping, mechanical parts with requirements suited to the material |
| Recommended use environment | Primarily indoors |
| Resistance to acids and bases | No |
| EAN | 6922572223417 |
|---|
Will this filament suit my 3D printer?
Check that your printer supports 1.75 mm filament, a nozzle temperature of 210–230 °C and a build plate temperature of 65 °C. A PEI build surface and a 0.4 mm nozzle are recommended.
Can prints be used outdoors or left in a car?
The material is recommended primarily for indoor use and is not resistant to UV radiation, acids or bases. Finished prints must not be exposed to high temperatures, such as inside a hot car or in strong sunlight.












Gudri pirkumi vienuviet