Free delivery to Latvijas Pasts parcel lockers from 35 €
Free delivery to Latvijas Pasts parcel lockers from 35 €
0
eSun

eSUN PLA-Matte Rainbow 3D printing filament 1.75 mm, 1 kg, Macaron

21.40 € incl. VAT
In supplier warehouse · 24 pcs. Delivery Time: 4–10 business days

In your cart: 0

Delivery options to:

Latvia
Store pickup Estimated: 26.11.–04.12.
Free
Parcel locker delivery Estimated: 30.11.–08.12.
from 1.90 €
Courier delivery Estimated: 30.11.–08.12.
from 4.90 €

eSUN PLA-Matte Rainbow is a 3D printing filament with colour transitions in Macaron shades. A single spool creates colour variations in models, with a smooth matte finish that reduces the visibility of surface reflections.

Applications and limitations

Use it for decorations, decorative figurines, cosplay props and prototypes. Mechanical parts require appropriately selected requirements. Support structures are easy to remove. The material is recommended primarily for indoor use because it is not resistant to UV radiation, acids or bases. Its heat deflection temperature is 50.2 °C at 0.45 MPa. Finished prints should not be exposed to high temperatures, such as in a hot car or strong sunlight.

Printing settings

  • Temperatures: 210–230 °C nozzle and 65 °C build plate.
  • Equipment: a PEI build plate and 0.4 mm nozzle are recommended.
  • Speed and cooling: print below 300 mm/s with the fan set to 100%.
  • Preparation: drying at 60 °C for more than 8 hours is recommended before printing.

For a better surface finish, enable Z-seam alignment and start point alignment, disable Z-axis lift during travel moves and optimise the print path. Reduce print speed if necessary.


ManufacturereSUN
ModelPLA-Matte Rainbow
Type3D printing filament
MaterialPLA-Matte Rainbow
ColourMacaron
FinishMatte
Filament weight1 kg
Filament diameter1.75 mm
Density1.329 g/cm³
Nozzle temperature210–230 °C
Build plate temperature65 °C
Recommended build plate materialPEI
Recommended nozzle diameter0.4 mm
Print speedLess than 300 mm/s
Fan speed100%
Recommended drying60 °C for more than 8 hours
Heat deflection temperature50.2 °C (0.45 MPa)
Tensile strength (X-Y)39.81 MPa
Tensile strength (Z)16.23 MPa
Elongation at break (X-Y)5.75%
Elongation at break (Z)1.80%
Flexural strength (X-Y)65 MPa
Flexural strength (Z)26.6 MPa
UV resistanceNo
ApplicationsDecorations, cosplay, prototyping, mechanical parts with appropriately selected requirements
EAN6922572215320
Is this filament suitable for outdoor use?

It is recommended primarily for indoor use because it is not resistant to UV radiation, acids or bases. Finished prints should not be exposed to high temperatures.

Are several spools needed for colour transitions?

No. The colours change within a single spool of PLA-Matte Rainbow filament.

Reviews

No reviews for this item yetOnly customers can leave a review, after buying the item.