eSUN PLA-Matte Rainbow 3D printing filament, 1.75 mm, 1 kg, Bloom
In your cart: 0
Delivery options to:
LatviaeSUN PLA-Matte Rainbow is a 3D printing filament in Bloom, combining colour gradients with a matte finish and a smooth printed surface. A single spool produces changing shades within your models. This variant has a 1.75 mm diameter and 1 kg filament weight.
Finish and applications
The matte finish reduces visible light reflections. Suitable uses include decorations, display figurines, cosplay props and prototypes, with easy removal of support structures. Mechanical parts require appropriately selected requirements for the intended part.
Printing settings
- Temperature: use a nozzle temperature of 210–230 °C and a bed temperature of 65 °C; a PEI bed surface and 0.4 mm nozzle are recommended.
- Speed and cooling: print below 300 mm/s with the fan set to 100%.
- Preparation: drying at 60 °C for more than 8 hours is recommended before printing.
For a better surface finish, enable Z-seam alignment and start point alignment, disable Z-axis lift during travel moves and optimise the print path. Reduce print speed if needed.
Use limitations
The material is recommended primarily for indoor use because it is not resistant to UV radiation, acids or bases. Its heat deflection temperature is 50.2 °C at 0.45 MPa. Finished prints should not be exposed to high temperatures, such as inside a hot car or in strong sunlight.
| Manufacturer | eSUN |
|---|---|
| Model | PLA-Matte Rainbow |
| Type | 3D printing filament |
| Material | PLA-Matte Rainbow |
| Colour | Bloom |
| Finish | Matte |
| Filament weight | 1 kg |
| Filament diameter | 1.75 mm |
| Density | 1.329 g/cm³ |
| Nozzle temperature | 210–230 °C |
| Bed temperature | 65 °C |
| Recommended bed material | PEI |
| Recommended nozzle diameter | 0.4 mm |
| Print speed | Less than 300 mm/s |
| Fan speed | 100% |
| Recommended drying before printing | 60 °C for more than 8 hours |
| Heat deflection temperature | 50.2 °C (0.45 MPa) |
| Tensile strength (X-Y) | 39.81 MPa |
| Tensile strength (Z) | 16.23 MPa |
| Elongation at break (X-Y) | 5.75% |
| Elongation at break (Z) | 1.80% |
| Flexural strength (X-Y) | 65 MPa |
| Flexural strength (Z) | 26.6 MPa |
| UV resistance | No |
| Applications | Decorations, cosplay, prototyping, mechanical parts with appropriately selected requirements |
| Resistance to acids and bases | No |
| Use environment | Primarily indoors |
| EAN | 6922572226715 |
|---|
Are finished prints suitable for outdoor use?
The material is recommended primarily for indoor use because it is not resistant to UV radiation, acids or bases. Prints should not be exposed to high temperatures, including inside a hot car or in strong sunlight.
Should the filament be dried before printing?
Drying at 60 °C for more than 8 hours is recommended before printing.












Gudri pirkumi vienuviet