eSUN PLA-Matte filament 1.75 mm, 1 kg, almond yellow
In your cart: 0
Delivery options to:
LatviaeSUN PLA-Matte is an almond-yellow PLA filament for FDM 3D printing. It creates a smooth, matte surface with less visible layer lines than standard PLA, reducing the amount of surface finishing needed.
Finish and material properties
Compared with standard PLA, the material offers greater impact resistance and flexibility, with less susceptibility to brittle cracking when bent. Support structures are easy to remove. It suits decorations, figurines, architectural models, enclosures, accessories and cosplay props.
Feeding and print settings
- Material feed: even winding and a stable 1.75 mm diameter support smooth feeding into the extruder and reduce the risk of tangling.
- Adhesion: good build plate and layer adhesion, low shrinkage and low warping help maintain printed dimensions.
- Melting: even melting reduces nozzle clogging and unwanted strings between printed sections.
Recommended settings are a nozzle temperature of 190–230 °C, a bed temperature of 45–60 °C, a print speed of 40–100 mm/s and a fan speed of 100%. Compatibility covers most FDM printers, including select models from Bambu Lab, Prusa, Creality, Voron and Raise3D.
Spool and packaging
The 1 kg filament comes on a recyclable cardboard spool. Vacuum-sealed packaging with a desiccant helps protect the material from moisture and contaminants until opened.
| Manufacturer | eSUN |
|---|---|
| Model | PLA-Matte |
| Material type | PLA |
| Colour | Almond yellow |
| Filament diameter | 1.75 mm |
| Filament weight | 1 kg |
| Finish | Matte |
| Printing technology | FDM |
| Nozzle temperature | 190–230 °C |
| Build plate temperature | 45–60 °C |
| Recommended print speed | 40–100 mm/s |
| Recommended fan speed | 100% |
| Density | 1.329 g/cm³ |
| Tensile strength | 42 MPa |
| Flexural strength | 59.95 MPa |
| Flexural modulus | 2878.5 MPa |
| Izod impact strength | 6.2 kJ/m² |
| Elongation at break | 50% |
| Heat deflection temperature | 51 °C |
| Melt flow index (MFI) | 5.8 g/10 min (190 °C / 2.16 kg) |
| Spool type | Cardboard, recyclable |
| Compatibility | Most FDM 3D printers, including select Bambu Lab, Prusa, Creality, Voron and Raise3D models |
| Packaging | Vacuum-sealed with a desiccant |
| EAN | 6922572201835 |
|---|
Does it fit every printer from the listed brands?
Compatibility is stated for most FDM printers and select models from Bambu Lab, Prusa, Creality, Voron and Raise3D. Compatibility with every model from these brands is not specified.












Gudri pirkumi vienuviet