eSun PLA-Matte Dual filament 1.75 mm, 1 kg, black and red
In your cart: 0
Delivery options to:
LatviaeSun PLA-Matte Dual is an FDM 3D printing filament that combines two distinctly separate colours, black and red, in one strand. It enables two-colour models without changing filament during printing, while the matte finish reduces the visibility of printed layers.
Material properties and uses
It is suitable for decorations, cosplay accessories, large models and prototypes used to test initial design concepts.
- Shape stability: low shrinkage and minimal warping.
- Feeding: even filament feed and low brittleness reduce the risk of feeding interruptions and strand breakage.
- Post-processing: support structures are easy to remove from the finished model.
Printing settings
The recommended print speed is 40–300 mm/s, with a nozzle temperature of 215–230 °C and a bed temperature of 45–60 °C. The specified cooling setting is 100%. These parameters are based on a 0.4 mm nozzle and may vary with other nozzle diameters. The material is relatively soft, so excessive feeder pressure can hinder proper filament feeding.
| Manufacturer | eSun |
|---|---|
| Model | PLA-Matte Dual |
| Material type | PLA |
| Colour | Black and red |
| Filament diameter | 1.75 mm |
| Filament net weight | 1 kg |
| Printing technology | FDM |
| Surface finish | Matte |
| Nozzle temperature | 215–230 °C |
| Bed temperature | 45–60 °C |
| Recommended print speed | 40–300 mm/s |
| Cooling | 100% |
| Density | 1.174 g/cm³ |
| Tensile strength | 13.58 MPa |
| Elongation at break | 39% |
| Flexural strength | 56.72 MPa |
| Heat deflection temperature | 54 °C |
| Nozzle diameter used for stated parameters | 0.4 mm |
| EAN | 6922572208018 |
|---|
Do I need to change filament to print a two-colour model?
No. Black and red are combined as two distinct colours in one strand, allowing two-colour models without changing filament during printing.
What should I consider when adjusting the feeder?
The material is relatively soft. Excessive feeder pressure can hinder proper filament feeding.












Gudri pirkumi vienuviet