eSun PLA-Luminous 3D printing filament, 1.75 mm, 1 kg, glow-in-the-dark green
In your cart: 0
Delivery options to:
LatviaeSun PLA-Luminous is a green filament for 3D printing glow-in-the-dark decorations, figurines, toys and sculptures. Its phosphorescent additives absorb light and then emit it, producing a particularly strong glow after exposure to UV light.
The 1.75 mm filament is compatible with most FDM 3D printers. Each spool holds 1 kg of material, approximately 340–350 m. The filament offers good dimensional stability and layer adhesion with a low tendency to warp, helping produce smooth prints. It is neatly wound to reduce tangles and overlapping coils during feeding.
| Manufacturer | eSun |
|---|---|
| Colour | Green |
| Material | PLA-Luminous |
| Diameter | 1.75 mm |
| Filament weight | 1 kg |
| Filament length | 340–350 m |
| Printing temperature | 190–230 °C (215 °C recommended) |
| Print bed temperature | 45–60 °C |
| Print speed | 40–100 mm/s |
| Fan speed | 100% |
| Compatibility | Most FDM 3D printers |
| Density | 1.2 g/cm³ |
| Tensile strength | 72 MPa |
| Flexural strength | 90 MPa |
| Flexural modulus | 1915 MPa |
| Elongation at break | 11.8% |
| Izod impact strength | 5.4 kJ/m² |
| Melt flow rate | 3.5 g/10 min (190 °C / 2.16 kg) |
| Heat deflection temperature | 53 °C (0.45 MPa) |
| EAN | 6922572219441 |
|---|
Do prints need UV light to glow?
The material glows in the dark after absorbing light. UV light is not specified as a requirement, but the glow is particularly intense after UV exposure.












Gudri pirkumi vienuviet