eSun PLA-Luminous 3D printing filament, 1.75 mm, 1 kg, blue
In your cart: 0
Delivery options to:
LatviaBlue eSun PLA-Luminous filament gives 3D-printed decorations, figures, toys and sculptures a glow in the dark. Its phosphorescent additives absorb light energy and then emit it, with a stronger glow after exposure to UV light.
The material holds its dimensions well during printing and is less prone to warping. Good layer adhesion and a low tendency to form strings, bubbles or cracks help produce smooth surfaces. The filament is neatly wound to reduce tangles and help it feed evenly.
The recommended print temperature is 215 °C, with a bed temperature of 45–60 °C.
| Manufacturer | eSun |
|---|---|
| Colour | Blue |
| Material | PLA-Luminous |
| Diameter | 1.75 mm |
| Filament weight | 1 kg |
| Filament length | 340–350 m |
| Printing temperature | 190–230 °C (215 °C recommended) |
| Bed temperature | 45–60 °C |
| Print speed | 40–100 mm/s |
| Fan speed | 100% |
| Compatibility | Most FDM 3D printers |
| Density | 1.2 g/cm³ |
| Tensile strength | 72 MPa |
| Flexural strength | 90 MPa |
| Flexural modulus | 1 915 MPa |
| Elongation at break | 11.8% |
| Izod impact strength | 5.4 kJ/m² |
| Melt flow rate | 3.5 g/10 min (190 °C / 2.16 kg) |
| Heat deflection temperature | 53 °C (0.45 MPa) |
| EAN | 6922572219458 |
|---|
How much filament is on one spool?
One spool contains 1 kg of filament, approximately 340–350 m long.












Gudri pirkumi vienuviet