Free delivery to Latvijas Pasts parcel lockers from 35 €
Free delivery to Latvijas Pasts parcel lockers from 35 €
0
Anycubic

Anycubic Water Washable Resin 2.0 3D printing resin, white, 1000 g

23.20 € incl. VAT
In supplier warehouse · 80 pcs. Delivery Time: 6–12 business days

In your cart: 0

Delivery options to:

Latvia
Store pickup Estimated: 30.11.–08.12.
Free
Parcel locker delivery Estimated: 02.12.–10.12.
from 1.90 €
Courier delivery Estimated: 02.12.–10.12.
from 4.90 €

Anycubic Water Washable Resin 2.0 is a white 3D printing resin for LCD and DLP printers using 365–405 nm light. Residue can be washed off with water after printing, without isopropyl alcohol.

Detail and printing settings

Precision up to 0.15 mm supports fine structures in miniatures and complex models. Low shrinkage helps retain shape during curing, while improved toughness reduces cracking and breakage. The resin has a low odour during processing.

  • Quantity: 1000 g of white resin.
  • Exposure: 25–40 s for the first layer and 2–2.5 s per layer.
  • Printing temperature: recommended range of 20–50 °C.

Hazards and precautions

Danger! Causes skin irritation. May cause an allergic skin reaction. Causes serious eye damage. Harmful to aquatic life with long lasting effects. Keep out of reach of children and avoid release to the environment. Wear protective gloves, protective clothing, eye protection and face protection. Wash hands, forearms and face thoroughly after handling.

If on skin, wash with plenty of soap and water. If in eyes, rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do, and continue rinsing. Immediately call a doctor or poison centre. If medical advice is needed, have the product container or label at hand. Dispose of contents and container to an approved waste disposal plant.


Contents1000 g
Shore hardnessD82–D85
First-layer exposure time25–40 s
Exposure time per layer2–2.5 s
Recommended printing temperature20–50 °C
Wavelength365–405 nm
Compatible light sourcesLCD / DLP
ColourWhite
Type3D printing resin
Post-print cleaningWater, without isopropyl alcohol
PrecisionUp to 0.15 mm
ShrinkageLow
ToughnessImproved
Elongation at breakUp to approximately 16–22%
Odour during processingLow
EAN6974662351555
Is isopropyl alcohol needed for cleaning?

No. Resin residue can be washed off with water after printing. Avoid release to the environment; dispose of contents and container through an approved waste disposal plant.

Which printers is this resin compatible with?

It is compatible with LCD and DLP 3D printers using 365–405 nm light.

Reviews

No reviews for this item yetOnly customers can leave a review, after buying the item.