FNIRSI 2C23T 10 MHz oscilloscope with multimeter and signal generator
In your cart: 0
Delivery options to:
LatviaThe FNIRSI 2C23T is a portable 10 MHz oscilloscope with two independent channels, a True RMS multimeter and a signal generator. A fold-out stand holds the 2.8-inch colour display upright for bench use.
Waveforms, electrical readings and test signals
- Oscilloscope. Sample at 50 MS/s and choose automatic, normal or single triggering. Save waveform screenshots and export them to a computer for viewing.
- Multimeter. Measure AC voltage up to 750 V, DC voltage up to 1000 V, current, resistance and capacitance. The meter also tests diodes and continuity and identifies live and neutral wires. It selects the range automatically, holds readings on screen and uses ceramic fuses for protection.
- Signal generator. Choose from sine, rectangular, triangle, full-cycle, half-cycle, noise and DC outputs. Set the frequency from 1 Hz to 2 MHz, the amplitude from 0.1 to 3.3 V and the duty cycle from 0 to 100%.
Battery and housing
The built-in 3000 mAh lithium battery provides up to 8 hours of operation. Charging uses a USB-C cable at 5 V and 1 A. The ABS housing has a silicone cover.
| Manufacturer | FNIRSI |
|---|---|
| Model | 2C23T |
| Screen | 2.8-inch colour screen |
| Screen resolution | 320 × 240 px |
| Charging | Via USB-C cable, 5 V / 1 A |
| Battery | Lithium, 3000 mAh |
| Functions | Oscilloscope, signal generator, multimeter |
| Standby time | 6 hours |
| Supported languages | English, Russian, Portuguese, Japanese and German |
| Dimensions | 167 × 89 × 35 mm |
| Weight | 300 g |
| Oscilloscope channels | 2 |
| Sampling rate | 50 MS/s |
| Analogue bandwidth | 10 MHz |
| Oscilloscope memory | 32 kb |
| Input impedance | 1 MΩ |
| Time base range | 50 ns to 10 s |
| Vertical sensitivity | 20 mV/div to 10 V/div (X1) |
| Maximum oscilloscope voltage | 400 V |
| Trigger modes | Automatic, normal, single |
| Trigger type | Rising or falling edge |
| Display modes | YT and scroll |
| Input coupling | AC and DC |
| Waveform screenshot saving | Supported |
| Waveform viewing on a computer | Supported |
| Generator channels | 1 |
| Generator frequency | 1 Hz to 2 MHz |
| Generator amplitude | 0.1–3.3 V |
| Multimeter voltage limits | AC up to 750 V, DC up to 1000 V |
| Generator duty cycle | 0–100% |
| Battery operating time | Up to 8 hours |
| EAN | 5907085527307 |
|---|
Which probes come with the oscilloscope?
The kit includes a 10X probe, a crocodile-clip probe and a multimeter probe, along with the device, a charging cable and a user manual.
Can I transfer saved waveform screenshots to a computer?
Yes. You can save waveform screenshots on the oscilloscope and export them to a computer for viewing.












Gudri pirkumi vienuviet