Cable pair tracer with transmitter and receiver, RJ-11
In your cart: 0
This cable pair tracer uses a transmitter and an inductive receiver to identify and locate wires without damaging their insulation. It supports tracing wires in bundles, finding breaks and fault locations, and checking conductor continuity.
Connection and signal detection
Connect the transmitter using the RJ-11 connector or crocodile clips. The tracer supports multi-pair cables with up to 100 pairs. Signal gain is adjustable, and the receiver provides audible indication with adjustable volume. A mini-jack socket allows headphones to be connected to the receiver.
- Wire tracing: identify a conductor in a bundle and locate damaged sections.
- Continuity testing: check whether a conductor is continuous.
- Telephone lines: identify the tone signal and line status — ringing, idle or busy.
Contents and power
The set includes a transmitter, receiver, carrying case and 2 6F22 9 V batteries to power the equipment.
| Power supply | 2 × 6F22 9 V batteries, included |
|---|---|
| Transmitter signal | 1.5 kHz |
| Receiver signal | 100–300 kHz |
| Transmitter weight | 114 g |
| Receiver weight | 106 g |
| Transmitter dimensions | 145 × 35 × 25 mm |
| Receiver dimensions | 238 × 43 × 26 mm |
| Cable connection | RJ-11 connector or crocodile clips |
| Multi-pair cables | Up to 100 pairs |
| Signal gain | Adjustable |
| Receiver audible indication | Adjustable volume |
| Headphone connection | Mini-jack socket on the receiver |
| Test functions | Wire identification, break and fault location, continuity testing |
| Telephone line testing | Tone signal and status identification: ringing, idle, busy |
| EAN | 5907621810856 |
|---|
Does tracing require damage to the wire insulation?
No. The tracer is designed to identify and locate wires without damaging their insulation. Connection is via RJ-11 or crocodile clips.
What is included?
A transmitter, receiver, 2 6F22 9 V batteries and a carrying case.
























Gudri pirkumi vienuviet