Meross MSH450PROMA Wi-Fi smart home hub with Matter
In your cart: 0
Delivery options to:
LatviaThe Meross MSH450PROMA connects and manages compatible smart home sensors and accessories. Matter support integrates them with Apple Home, Google Home, Amazon Alexa and Home Assistant.
Connectivity and control
The hub uses Bluetooth Low Energy and 433 MHz RF communication with a range of up to 150 m. It supports local control, while compatible platforms provide voice commands and automation.
- Accessory migration: transfer previously connected accessories from an older gateway with one touch, without pairing them again.
- Voice notifications: customisable messages announce events detected by compatible sensors, for example identifying the type of hazard and the room involved.
- Audible alarm: a standard audible alarm is available alongside voice messages.
Requirements and setup
An existing 2.4 GHz Wi-Fi network and a smartphone running iOS 16.1 or later or Android 8.1 or later are required. Enterprise Wi-Fi is not supported. Power specification: 5 V DC / 1 A, minimum 500 mA.
The 76 × 76 × 26 mm housing includes a status LED and a control button. Pressing twice within 2 seconds activates pairing mode; holding the button for 5 seconds initiates a factory reset.
| Manufacturer | Meross |
|---|---|
| Model | MSH450PROMA |
| Device type | Smart Wi-Fi gateway |
| Integration standard | Matter |
| Connectivity | Wi-Fi, Bluetooth Low Energy (BLE), 433 MHz RF |
| Wi-Fi standard | IEEE 802.11 b/g/n |
| Wi-Fi frequency | 2.4 GHz |
| Communication range | Up to 150 m |
| Network security | WEP 64/128-bit, WPA-PSK, WPA2-PSK |
| Compatible platforms | Apple Home, Google Home, Amazon Alexa, Home Assistant |
| Compatible Meross devices | MS120, MS220, MS420, MS700, MTS150, MTS150P, GS559A, MA151, MS130, MS100F, MS200, MS400 |
| Power supply | 5 V DC / 1 A (minimum 500 mA) |
| Dimensions | 76 × 76 × 26 mm |
| LED indicator | 1 status LED |
| Button | 1 power and setup button |
| Supported systems | iOS 16.1 or later, Android 8.1 or later |
| Operating temperature | 0 °C to 40 °C |
| Storage temperature | -40 °C to 70 °C |
| Operating humidity | 10–90% (non-condensing) |
| Storage humidity | 5–90% (non-condensing) |
| Requirements | Existing 2.4 GHz Wi-Fi network |
| Enterprise Wi-Fi support | No |
| Local control | Supported |
| Accessory migration | One-touch transfer from an older gateway without re-pairing |
| Notifications and alarm | Customisable voice notifications and an audible alarm |
| EAN | 6942349224263 |
|---|
Which Meross devices are compatible?
Compatibility is listed for MS120, MS220, MS420, MS700, MTS150, MTS150P, GS559A, MA151, MS130, MS100F, MS200 and MS400.
What Wi-Fi network and phone are needed for setup?
You need an existing 2.4 GHz Wi-Fi network and a phone running iOS 16.1 or later or Android 8.1 or later. Enterprise Wi-Fi is not supported.












Gudri pirkumi vienuviet