Changeover switch CNC YCBZ-40, 2-pole, 40 A, 1-0-2
In your cart: 0
Delivery options to:
LatviaThe CNC YCBZ-40 is a modular 2-pole, 40 A changeover switch for manually selecting a power source in 230 V / 400 V AC circuits at 50/60 Hz. It can switch between mains power and a backup source such as a generator or an uninterruptible power supply (UPS).
The switch has a common upper contact and a three-position handle. Positions 1 and 2 select the source, while the centre position (0) opens the circuit. It can also serve as a switch-disconnector, making and breaking the circuit under load in normal operating conditions.
The switch clips onto a 35 mm DIN rail and accepts conductors with a cross-section of up to 10 mm².
| Number of poles | 2 |
|---|---|
| Rated operational voltage (Ue) | 230 V / 400 V AC |
| Maximum voltage | 240 V / 415 V AC |
| Rated current | 40 A |
| Frequency | 50/60 Hz |
| Contact positions | I – 0 – II |
| Mechanical life | 8 500 cycles |
| Electrical life | 1 500 cycles |
| Mounting | 35 mm DIN rail (EN 60715) |
| Maximum conductor cross-section | 10 mm² |
| Operating temperature | −5 °C to +40 °C |
| Dimensions | 36 × 61 × 77 mm |
| Degree of protection | IP20 |
| Colour | White |
| Standards and utilisation category | IEC 60947-3 / EN 60947-3, AC-22A |
| EAN | 6942034338268 |
|---|
Does the switch transfer to backup power automatically?
No. You select the power source manually using the three-position handle.












Gudri pirkumi vienuviet