Kategooriad
- Kingitused ja peokaunistused
- Telefonitarvikud
- Foto ja video
- Arvutid ja elektroonika
- Sport ja fitness
- Ilu ja tervis
- Auto- ja mototarvikud
- Jalgrattatarvikud
- Kodu ja sisustus
- Aed ja õuekaubad
- Beebi- ja lastekaubad
- Mängud ja hobid
- Reisi-, matka- ja vabaajatarbed
- Lemmikloomatarbed
- Allahinnatud ja defektidega tooted
KNIPEX Diagonal Cutter 110 mm
Knipex
Hind: 22.30 €
| Kaubakood: | 193178 |
|---|---|
| Tootja: | Knipex |
| Saadavus: | Tarnija laos olemas |
| Ooteaeg: | 7-15 tööpäeva |
| EAN: | 4003773048138 |
Tarnevõimalused – tarneriik:
LatviaKättesaamine kontorist
Tasuta
Eeldatav: 03.11.–13.11.
Tarne pakiautomaati
alates 1.90 €
Eeldatav: 05.11.–17.11.
Kulleriga kohaletoimetamine
4.90 €
Eeldatav: 05.11.–17.11.
The KNIPEX diagonal cutter is designed for clean cutting of various wire types, delivering precise cuts on thin copper wires even at the cutting edge tips.
Design and Cutting Capacities
- Cutting edges induction-hardened to approximately 62 HRC
- Clean cutting on thin Cu wires even at the tips
- Black atramentized pliers body with polished head
- Handles coated with plastic for secure handling
- Cutting capacities: soft wire up to 3.0 mm, medium-hard wire up to 2.0 mm, hard wire up to 1.2 mm
| Product type | Diagonal cutter |
|---|---|
| Material | Steel / plastic |
| Finish | Black atramentized |
| Head | Polished |
| Handle type | Plastic coated |
| Cutting edge hardness | approx. 62 HRC |
| Cutting capacity, soft wire (diameter) | 3.0 mm |
| Cutting capacity, medium-hard wire (diameter) | 2.0 mm |
| Cutting capacity, hard wire (diameter) | 1.2 mm |
| Overall length | 110 mm |
| Width | 5,2 cm |
| Height | 1,2 cm |
| Weight | 80 g |
| Colour | Red / black |
| Collecting container | No |
| Adjusting screw | No |
| REACH compliance | No |
| RoHS compliance | No |
What wire diameters can this cutter handle?
This cutter handles soft wire up to 3.0 mm, medium-hard wire up to 2.0 mm, and hard wire up to 1.2 mm in diameter, as well as thin copper wire.
What is the hardness of the cutting edges?
The cutting edges are induction-hardened and have a hardness of approximately 62 HRC.
15+ aastatLäti veebipood
Kiire väljasaatmineLaokaubad 24 tunni jooksul
Tasuta tarneLatvijas Pasts pakiautomaatidesse alates 35 €
Lihtne tagastamineGarantii ja lihtne tagastusprotsess
22.30 €
