EcoFlow XT60 output cable for Alternator Charger, 1 m

Hind: 45.40 €

Kaubakood:	196817
Tootja:	Ecoflow
Saadavus:	Tarnija laos olemas
Ooteaeg:	5-12 tööpäeva
EAN:	4895251665995

Tarnevõimalused – tarneriik:

Latvia

Kättesaamine kontorist

Tasuta

Eeldatav: 30.10.–10.11.

Tarne pakiautomaati

Tasuta

Eeldatav: 03.11.–12.11.

Kulleriga kohaletoimetamine

4.90 €

Eeldatav: 03.11.–12.11.

This 1 m EcoFlow output cable connects an EcoFlow Alternator Charger to a portable power station with an XT60 input. It supports EcoFlow power stations and selected devices from other manufacturers with a suitable input.

Power output is up to 500 W, depending on the power station’s XT60 input specifications. Once the cable is connected, the charger supports Charge mode only.

Important compatibility requirement: if your vehicle’s starter battery or your RV’s onboard battery has a voltage of 24 V, the maximum rated voltage of the XT60 input must exceed 48 V. Otherwise, the cable may not function properly.

Manufacturer	EcoFlow
Model	EFLAltXT60OuDC013-1m
Length	1 m
Compatibility	EcoFlow portable power stations and those from other manufacturers with an XT60 input, subject to input specifications
Supported mode	Charge
Maximum output power	500 W (power depends on the XT60 input specifications)
Requirement when using a 24 V battery	If the starter battery or RV onboard battery is 24 V, the maximum rated voltage of the XT60 input must exceed 48 V.

Will this cable work with any power station that has an XT60 input?

It is intended for EcoFlow power stations and selected models from other manufacturers with an XT60 input. Check the input specifications, as these determine the available power. When using a 24 V starter battery or RV onboard battery, the XT60 input’s maximum rated voltage must exceed 48 V.

Which charger modes are available with this cable connected?

With this cable connected, the EcoFlow Alternator Charger supports Charge mode only.