Kategooriad
- Kingitused ja peokaunistused
- Telefonitarvikud
- Foto ja video
- Arvutid ja elektroonika
- Sport ja fitness
- Ilu ja tervis
- Auto- ja mototarvikud
- Jalgrattatarvikud
- Kodu ja sisustus
- Aed ja õuekaubad
- Beebi- ja lastekaubad
- Mängud ja hobid
- Reisi-, matka- ja vabaajatarbed
- Lemmikloomatarbed
- Allahinnatud ja defektidega tooted
ANYCUBIC Water-Wash Resin 2.0 3D Printer Photopolymer Resin, 1 kg, Gray
AnycubicKaup ei ole praegu laos
Hind: 20.90 €
| Kaubakood: | 184327 |
|---|---|
| Tootja: | Anycubic |
| Saadavus: | Kaup ei ole praegu laos |
| EAN: | 6974662351593 |
ANYCUBIC Water-Wash Resin 2.0 is a photopolymer resin designed for LCD and DLP 3D printers, allowing residue removal using water alone without isopropyl alcohol.
Key Features
- Water-based cleaning or cleaning with 95% IPA
- Low volumetric shrinkage rate of 2.2% to 5.5% with 0.15 mm precision
- High crack resistance with an elongation at break of 16% to 22%
- Reduced odor and anti-yellowing formula
- Compatible with LCD and DLP 3D printers using 405 nm UV curing technology
| Manufacturer | ANYCUBIC |
|---|---|
| Model | Water-Wash Resin 2.0 |
| Color | Gray |
| Material | Light-curable resin modified with hydrophilic groups |
| Wavelength | 365–405 nm |
| Viscosity | 190–230 mPa·s (25°C) |
| Density | 1.07–1.09 g/cm³ |
| Hardness | 82–85 HD |
| Tensile strength | 38–43 MPa |
| Elongation at break | 16–22% |
| Flexural modulus | 48–60 MPa |
| Flexural strength | 2300–3000 MPa |
| Young’s modulus | 1100–1300 MPa |
| Izod impact strength | 133 J/m |
| Volumetric shrinkage | 2.2–5.5% |
| Printing temperature | 20–50°C |
| Recommended ambient temperature during printing | 20–40°C |
| Exposure time for the first layer | 25–40 s |
| Exposure time for a standard layer | 2–2.5 s |
| Cleaning agent | 95% IPA / Water |
| Cleaning time | 95% IPA: ≥3 min; Water: medium, ≥5 min |
| UV wavelength during curing | 405 nm |
| Curing temperature | 18–30°C |
| UV irradiance | 25 000–30 000 µW/cm² |
| Curing time | 3 min |
| Weight | 1 kg |
Can models be cleaned with water?
Yes, the hydrophilic formula allows resin residue to be washed off with water alone (≥5 min) or with 95% IPA (≥3 min).
What 3D printers are compatible with this resin?
It is compatible with LCD and DLP 3D printers operating within 365–405 nm wavelength and using 405 nm UV curing technology.
15+ aastatLäti veebipood
Kiire väljasaatmineLaokaubad 24 tunni jooksul
Tasuta tarneLatvijas Pasts pakiautomaatidesse alates 35 €
Lihtne tagastamineGarantii ja lihtne tagastusprotsess
20.90 €
