Kategooriad
- Kingitused ja peokaunistused
- Telefonitarvikud
- Foto ja video
- Arvutid ja elektroonika
- Sport ja fitness
- Ilu ja tervis
- Auto- ja mototarvikud
- Jalgrattatarvikud
- Kodu ja sisustus
- Aed ja õuekaubad
- Beebi- ja lastekaubad
- Mängud ja hobid
- Reisi-, matka- ja vabaajatarbed
- Lemmikloomatarbed
- Allahinnatud ja defektidega tooted
Anycubic TPU 3D Printer Filament 1 kg, Transparent Orange (IPHTPCO-102)
Anycubic
Hind: 22.70 €
| Kaubakood: | 176149 |
|---|---|
| Tootja: | Anycubic |
| Saadavus: | Tarnija laos olemas |
| Ooteaeg: | 5-12 tööpäeva |
| EAN: | 6974662353139 |
Tarnevõimalused – tarneriik:
LatviaKättesaamine kontorist
Tasuta
Eeldatav: 30.10.–10.11.
Tarne pakiautomaati
alates 1.90 €
Eeldatav: 03.11.–12.11.
Kulleriga kohaletoimetamine
4.90 €
Eeldatav: 03.11.–12.11.
Anycubic TPU filament is a flexible 3D printing material featuring a rubber-like texture, high tensile strength, and abrasion resistance.
Key Features
- High flexibility with elongation at break of 697%
- Resistant to wear, abrasion, and oils
- 95A hardness providing stable feeding and consistent extrusion
- Suitable for phone cases, wristbands, vibration dampers, and wheels
| Manufacturer | Anycubic |
|---|---|
| Model | IPHTPCO-102 |
| Material | TPU |
| Color | Transparent Orange |
| Weight | 1 kg |
| Printing temperature | 195–230°C |
| Build plate temperature | 50–60°C |
| Print speed | 50–150 mm/s |
| Drying conditions | 70–80°C, 8 h |
| Compatibility with ACE Pro | No |
| Density | 1.23 g/cm³ |
| Material flow rate | 25 g/10 min |
| Deformation resistance | 52°C |
| Moisture absorption | 1.08% |
| Hardness | 95A |
| Tensile strength | 34.4 MPa |
| Elongation at break | 697% |
| Flexural strength | 4.26 MPa |
What are the recommended printing temperatures for Anycubic TPU?
The recommended printing temperature is 195–230°C, and the build plate temperature is 50–60°C.
Should this filament be dried before printing?
Yes, pre-drying at 70–80°C for 8 hours is recommended to avoid air bubbles during printing.
Is this filament compatible with ACE Pro?
No, this TPU filament is not compatible with ACE Pro.
15+ aastatLäti veebipood
Kiire väljasaatmineLaokaubad 24 tunni jooksul
Tasuta tarneLatvijas Pasts pakiautomaatidesse alates 35 €
Lihtne tagastamineGarantii ja lihtne tagastusprotsess
22.70 €
