Kategooriad
- Kingitused ja peokaunistused
- Telefonitarvikud
- Foto ja video
- Arvutid ja elektroonika
- Sport ja fitness
- Ilu ja tervis
- Auto- ja mototarvikud
- Jalgrattatarvikud
- Kodu ja sisustus
- Aed ja õuekaubad
- Beebi- ja lastekaubad
- Mängud ja hobid
- Reisi-, matka- ja vabaajatarbed
- Lemmikloomatarbed
- Allahinnatud ja defektidega tooted
Anycubic High Speed PLA 3D Printer Filament 1.75 mm 1 kg, White
Anycubic
Hind: 14.90 €
| Kaubakood: | 176659 |
|---|---|
| Tootja: | Anycubic |
| Saadavus: | Tarnija laos olemas |
| Ooteaeg: | 5-12 tööpäeva |
| EAN: | 6974662351760 |
Tarnevõimalused – tarneriik:
LatviaKättesaamine kontorist
Tasuta
Eeldatav: 30.10.–10.11.
Tarne pakiautomaati
alates 1.90 €
Eeldatav: 03.11.–12.11.
Kulleriga kohaletoimetamine
4.90 €
Eeldatav: 03.11.–12.11.
Anycubic High Speed PLA filament is engineered for fast, smooth 3D printing at speeds of up to 500 mm/s while maintaining sharp edges and fine details.
Key Features
- Optimized for high-speed 3D printing up to 500 mm/s
- Dimensional accuracy within ±0.02 mm
- Smooth material flow and fast layer cooling to prevent deformation
- Tangle-resistant structure for consistent feed
| Manufacturer | Anycubic |
|---|---|
| Model | IPHPLCG-106 |
| Color | White |
| Material | PLA |
| Dimensions | 1.75 mm |
| Weight | 1 kg |
| Volume | 1.26 g/cm³ |
| Elongation at break | 12% |
| Melting point of the filament | 165℃ |
| Heat distortion temperature | 56℃ |
| Accuracy | ±0.02mm |
| Length | 330 m |
| Tensile strength | 54MPa |
| Bending strength | 74MPa |
| Izod impact strength | 46J/m |
| Melting index | 4-69/10min |
| Storage environment | Dry and ventilated |
| Nozzle temperature | 190-210°C (50-150mm/s) | 210-230°C (150-300mm/s) | 230-260°C (300-600mm/s) |
| Printer platform material | Fine magnetic sticker |
| Surface treatment of the printing platform | Not required |
| Printer platform temperature | 50-60°C |
| Cooling fan | 100% |
| Printing speed | 40-250mm/sec |
| Pull-in speed | 50mm/sec |
| Recommended material | PVA |
| Drying temperature | 50°C |
What nozzle temperature is recommended before loading the filament?
It is recommended to heat the print head to at least 230 °C prior to loading the filament to prevent blockages.
What are the dimensions and total spool length?
The filament has a diameter of 1.75 mm and a total spool length of 330 m for the 1 kg pack.
15+ aastatLäti veebipood
Kiire väljasaatmineLaokaubad 24 tunni jooksul
Tasuta tarneLatvijas Pasts pakiautomaatidesse alates 35 €
Lihtne tagastamineGarantii ja lihtne tagastusprotsess
14.90 €
