Kategooriad
- Kingitused ja peokaunistused
- Telefonitarvikud
- Foto ja video
- Arvutid ja elektroonika
- Sport ja fitness
- Ilu ja tervis
- Auto- ja mototarvikud
- Jalgrattatarvikud
- Kodu ja sisustus
- Aed ja õuekaubad
- Beebi- ja lastekaubad
- Mängud ja hobid
- Reisi-, matka- ja vabaajatarbed
- Lemmikloomatarbed
- Allahinnatud ja defektidega tooted
3D Printer Resin ANYCUBIC ABS-Like Resin 3.0, 1 kg, Gray
AnycubicKaup ei ole praegu laos
Hind: 24.90 €
| Kaubakood: | 178375 |
|---|---|
| Tootja: | Anycubic |
| Saadavus: | Kaup ei ole praegu laos |
| EAN: | 6974662352293 |
ANYCUBIC ABS-Like Resin 3.0 is a photopolymer resin designed for LCD and DLP 3D printers, delivering high mechanical strength, crack resistance, and precise detail reproduction.
Key Features
- Compatible with LCD and DLP 3D printers operating at 365–405 nm UV wavelength
- Elongation at break of 25–30% and Izod impact strength of 130 J/m
- Low volumetric shrinkage rate of 3.9–4.9% with low viscosity
- Hardness rating of 83–86 HD for durable models, housings, and components
- Formulated for reduced odor during use
| Manufacturer | ANYCUBIC |
|---|---|
| Model | ABS-Like 3.0 |
| Color | Gray |
| Material | Photopolymer resin |
| Wavelength | 365–405 nm |
| Viscosity | 280–300 mPa·s (25°C) |
| Density | 1.06–1.09 g/cm³ |
| Hardness | 83–86 HD |
| Tensile strength | 38–45 MPa |
| Elongation at break | 25–30% |
| Flexural modulus | 50–65 MPa |
| Flexural strength | 1500–2000 MPa |
| Young’s modulus | 1 300–1 700 MPa |
| Izod impact strength | 130 J/m |
| Volumetric shrinkage | 3.9–4.9% |
| Printing temperature | 20–50°C |
| Recommended ambient temperature during printing | 20–40°C |
| Exposure time for the first layer | 23–40 s |
| Exposure time for a standard layer | 2–3.6 s |
| Cleaning agent | 95% IPA |
| Washing time | ≥3 min |
| UV wavelength during curing | 405 nm |
| Curing temperature | 18–30°C |
| UV irradiance | 25 000–30 000 µW/cm² |
| Curing time | 3 min |
| Weight | 1 kg |
Which 3D printers are compatible with this resin?
ANYCUBIC ABS-Like Resin 3.0 is compatible with LCD and DLP 3D printers that use UV light with a wavelength between 365 and 405 nm.
What cleaning agent is recommended for printed parts?
95% IPA (isopropyl alcohol) is recommended for washing prints, with a cleaning time of at least 3 minutes.
15+ aastatLäti veebipood
Kiire väljasaatmineLaokaubad 24 tunni jooksul
Tasuta tarneLatvijas Pasts pakiautomaatidesse alates 35 €
Lihtne tagastamineGarantii ja lihtne tagastusprotsess
24.90 €
