Kategooriad
- Kingitused ja peokaunistused
- Telefonitarvikud
- Foto ja video
- Arvutid ja elektroonika
- Sport ja fitness
- Ilu ja tervis
- Auto- ja mototarvikud
- Jalgrattatarvikud
- Kodu ja sisustus
- Aed ja õuekaubad
- Beebi- ja lastekaubad
- Mängud ja hobid
- Reisi-, matka- ja vabaajatarbed
- Lemmikloomatarbed
- Allahinnatud ja defektidega tooted
3D Printer Filament ELEGOO Rapid PLA+ 1.75 mm 1 kg, Brown (50.203.0313)
Elegoo
Hind: 12.70 €
| Kaubakood: | 176660 |
|---|---|
| Tootja: | Elegoo |
| Saadavus: | Tarnija laos olemas |
| Ooteaeg: | 5-12 tööpäeva |
| EAN: | 6932704908242 |
Tarnevõimalused – tarneriik:
LatviaKättesaamine kontorist
Tasuta
Eeldatav: 30.10.–10.11.
Tarne pakiautomaati
alates 1.90 €
Eeldatav: 03.11.–12.11.
Kulleriga kohaletoimetamine
4.90 €
Eeldatav: 03.11.–12.11.
ELEGOO Rapid PLA+ in brown is a 1.75 mm filament designed for fast technical prints, functional designs, prototypes, and structural components.
Key Features
- Supports high-speed printing up to 600 mm/s with smooth melt flow.
- 1.75 mm diameter with ±0.02 mm dimensional tolerance for consistent extrusion.
- Improved flexibility and crack resistance compared to standard PLA.
- Machine-wound recycled cardboard spool, vacuum-sealed with desiccant.
| Manufacturer | ELEGOO |
|---|---|
| Model | 50.203.0313 |
| Color | Brown |
| Weight | 1 kg |
| Pre-print drying | 55 ± 5°C |
| Ambient temperature and humidity | ≤ 50°C, ≤ 20% relative humidity (store with a desiccant) |
| Nozzle temperature | 200 – 230°C |
| Bed temperature (depending on printer and surface) | 35 – 65°C |
| Build plate type | Textured PEI (polyetherimide – a durable material that adheres well to prints) or other compatible plates |
| Print speed | Below 600 mm/s |
| Density | 1.23 g/cm³ |
| Melting point | 160°C |
| Heat deflection temperature | 57°C |
| Softening point (Vicat test) | 62°C |
| Tensile strength (XY – measured in the horizontal plane of the print, where the material is strongest) | 39 ± 2 MPa |
| Elongation at break (XY) | 8.5% ± 1.2% |
| Flexural strength (XY) | 71 ± 6 MPa |
| Flexural modulus (XY) | 2846 ± 175 MPa |
| Impact strength (XY) | 50.4 ± 2.8 kJ/m² |
What is the diameter and tolerance of this filament?
ELEGOO Rapid PLA+ has a diameter of 1.75 mm with a dimensional tolerance of ±0.02 mm.
What are the recommended nozzle and bed temperatures?
The recommended nozzle temperature is 200 – 230°C and the recommended bed temperature is 35 – 65°C.
What is the maximum printing speed supported?
It supports printing speeds of up to 600 mm/s on a properly calibrated printer.
15+ aastatLäti veebipood
Kiire väljasaatmineLaokaubad 24 tunni jooksul
Tasuta tarneLatvijas Pasts pakiautomaatidesse alates 35 €
Lihtne tagastamineGarantii ja lihtne tagastusprotsess
12.70 €
