AnyCubic Wash & Cure 3 Plus 3D Print Cleaning and Curing Device

Anycubic

AnyCubic Wash & Cure 3 Plus 3D Print Cleaning and Curing Device — image 3

AnyCubic Wash & Cure 3 Plus 3D Print Cleaning and Curing Device — image 4

AnyCubic Wash & Cure 3 Plus 3D Print Cleaning and Curing Device — image 5

Hind: 174.40 €

Kaubakood:	174704
Tootja:	Anycubic
Saadavus:	Tarnija laos olemas
Ooteaeg:	5-12 tööpäeva

Tarnevõimalused – tarneriik:

Latvia

Kättesaamine kontorist

Tasuta

Eeldatav: 30.10.–10.11.

Tarne pakiautomaati

alates 2.50 €

Eeldatav: 03.11.–12.11.

Kulleriga kohaletoimetamine

7.90 €

Eeldatav: 03.11.–12.11.

AnyCubic Wash & Cure 3 Plus 3D Print Cleaning and Curing Device

The AnyCubic Wash & Cure 3 Plus is a dedicated post-processing device designed for washing and UV-curing resin 3D prints.

Key Features

Three selectable operating modes: cleaning, curing, and FlexiCure with an adjustable UV lamp
Large 12-liter cleaning module with a 7.6-liter basket supporting two height settings
405 nm UV light source with 14 LEDs and a dual-layer curing platform
Manual timer adjustment from 1 to 30 minutes via integrated touch buttons
Quiet operation with an estimated noise level of approximately 65 dB

Manufacturer	AnyCubic
Model	WS3LA0WH-Y-O
UV light source	14 diodes 405 nm + lamp with adjustable design
Operation modes	Cleaning, curing, FlexiCure
Rated power	36 W
Input voltage	100-240 V 50/60 Hz
Cleaning / curing time adjustment	1-30 min
Max. dimensions of the model to be cured	ø220 x 260 mm
Max. dimensions of the model to be cleaned (with platform)	228 x 128 x 250 mm
Max. dimensions of the model to be cleaned (without platform)	228 x 128 x 260 mm
Cleaning module total capacity	12 L
Basket capacity	7.6 L
Control panel	Touch buttons
Material (basket, module, curing table)	PP
UV lamp height	380 mm
Dimensions	312 x 267 x 434 mm
Weight	5.7 kg

What modes are available on the Wash & Cure 3 Plus?

The device offers 3 operation modes: cleaning, curing, and FlexiCure enhanced curing using the included bendable UV lamp.

What are the maximum model dimensions for cleaning and curing?

For curing, the maximum model dimensions are ø220 x 260 mm. For cleaning, the maximum dimensions are 228 x 128 x 250 mm with a platform and 228 x 128 x 260 mm without a platform.

What is included in the package?

The package includes the main washing and drying device, cleaning module, cleaning basket, 4 sticks, curing table, bendable UV lamp, Allen wrench set, power supply, and user manual.